DX52D Galvanized Coil

Subjected to a chemical treatment, zinc coated steel sheet is engineered to withstand corrosion. Layers of zinc oxide are applied to the steel, forming a rust-resistant shield. This coating not only shields the steel from corrosion but also imparts increased durability, making it tough and resistant to scratches

Wechat : +86 18637285401
Whatsapp : +86 18637285401

Send Inquiry

Description

DX52D galvanized coil

DX52D galvanized coil is a surface galvanized sheet with yield strength of 235MPa.

Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.

surface-structure

Gi-product-introduction

Product Advantages：

01. Anticorrosive: 13 years in highly industrialized regions
02. Cheap: The cost of hot-dip galvanizing is lower than that of other coatings.
03. Reliable: The zinc coating is metallurgically attached to the steel, making it an integral part of the steel surface. This bonding process increases the coating's durability.
04. Superior durability: The galvanized coating creates a unique metallic structure that is resistant to mechanical stress in transit and handling.
05. Comprehensive protection: Every portion of the plated component can be galvanized, and is totally protected even in depressions, sharp corners, and concealed locations.
06. Save time and energy: The galvanizing process is faster than other coating methods.

detail image

Product name	DX52D Galvanized coil
Place of Origin	China
Type	Steel Coil
Standard	AISI, ASTM, BS, DIN, GB, JIS
Certificate	ISO9001
Grade	SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc
Thickness	0.1-5.0mm
Surface structure	anti-finger print /skin pass/oiled/ dry/chromated
Size	Customized according to customer needs
Tolerance	±1%
Processing Service	Bending, Welding, Decoiling, Cutting, Punching, Welding
Invoicing	by actual weight
Delivery Time	7-15 days
Technique	Hot Rolled Based, Cold Rolled
Port	Tianjin Qingdao or according to your requirement
Packaging Detail	in bundles, in bulk, customized packing.