galv sheet metal S500GD
Steel that has been covered with a coating of zinc is known as galvanized steel. Steel is shielded from corrosion by the zinc coating, which makes it a strong and long-lasting substance. Roofing, siding, fences, and industrial equipment are just a few of the many uses for galvanized steel.
How is steel that has been galvanized made?
A sheet of steel is immersed in a bath of molten zinc to create galvanized steel. A protective coating is formed on the steel when the zinc melts and sticks to it. Hot-dip and electrogalvanizing are the two primary techniques for galvanizing steel.
The most often used technique is hot-dip galvanizing. In the process of hot-dip galvanizing, a bath of molten zinc that is about 800 degrees Fahrenheit is submerged in the steel sheet. After melting, a layer of zinc that is between 0.002 and 0.006 inches thick is formed.
A less used technique is electrogalvanizing. The steel sheet is immersed in a zinc ion bath during the electrogalvanizing process. Zinc ions settle on the steel's surface when an electrical current is applied to it. The thickness of the zinc coating ranges from 0.0002 to 0.0005 inches.
Qualities of steel that has been zinc-plated
A lot of qualities make galvanized steel a popular material. These attributes consist of:
Corrosion resistance: Steel is shielded from corrosion by the zinc coating, which makes it a strong, long-lasting substance.
Strength: Capable of withstanding impact and wear, galvanized steel is a robust and long-lasting material.
Low upkeep: Galvanized steel is an affordable option as it needs little to no maintenance.
Using galvanized steel in many applications
There are several uses for galvanized steel, such as:
Roofing: For both commercial and residential roofing applications, galvanized steel roofing is a common option. It is adaptable to many climates, strong, and weatherproof.
Siding: Another excellent option for siding is galvanized steel siding. It may increase energy efficiency and is long-lasting and low-maintenance.
Galvanized steel fence is a robust and long-lasting material that is often used for fencing purposes. Furthermore, it is impervious to corrosion and rust.
Industrial equipment: Structures including buildings, bridges, and machinery are also made of galvanized steel. A galvanized steel coating may extend the lifespan and durability of these buildings.
In summary,
There are several advantages to using galvanized steel, which is a strong, adaptable material. It may lower your environmental impact and minimize maintenance expenses, making it an excellent option for a range of applications.
Product Advantages
01. Anticorrosive: 13 years in highly industrialized regions
02. Cheap: The cost of hot-dip galvanizing is lower than that of other coatings.
03. Reliable: The zinc coating is metallurgically attached to the steel, making it an integral part of the steel surface. This bonding process increases the coating's durability.
04. Superior durability: The galvanized coating creates a unique metallic structure that is resistant to mechanical stress in transit and handling.
05. Comprehensive protection: Every portion of the plated component can be galvanized, and is totally protected even in depressions, sharp corners, and concealed locations.
06. Save time and energy: The galvanizing process is faster than other coating methods.
|
Product Name |
Galvanized Coil |
|
Material |
Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490, |
|
SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340 , SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ |
|
|
CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); or Customer's Requirement |
|
|
Thickness |
0.12-6.00mm or customer's requirement |
|
Width |
600mm-1500mm, according to customer's requirement |
|
Zinc coated |
30g-275g/m2 |
|
Type of Coating |
Hot Dipped Galvanized Steel |
|
Surface Treatment |
Passivation(C), Oiling(O), Lacquer sealing(L), Phosphating(P), Untreated(U) |
|
Surface Structure |
Normal spangle coating(NS), minimized spangle coating(MS), spangle-free(FS) |
|
Coil ID |
508mm or 610mm |
|
Coil Weight |
3-20 metric ton per coil |
|
Standard |
JIS 3302 / ASTM A653 /EN10143 AISI , ASTM , DIN , GB , JIS G3302 G3312 G3321 , BS |
|
Technique |
Hot Rolled / Cold Rolled |
|
Product Application |
1. Fence, greenhouse, door pipe,greenhouse |
|
2. Low pressure liquid, water, gas, oil, line pipe |
|
|
3. For both indoor and outdoor the building construction |
|
|
4. Widely used in scaffolding construction which is much cheaper and convenient |
|
|
Origin |
Shandong China |
|
Certificates |
API ISO9001-2008,SGS.BV |
|
Delivery Time |
Usually within 10-45 days after receipt of advance payment |
Hot Tags: galv sheet metal s500gd, China galv sheet metal s500gd manufacturers, suppliers, factory
